Top off your VERSA-LOK® column in style with one of our many Pier Caps. Available in three varieties- the Flat Cap for a simple column, the Peak Cap for a more elegant look, and the Light Cap with its half peak and flat top, allowing you to easily install your own light fixture.
From simple steps to stairs built into a retaining wall or integrated into the side of a hill, designing is easy with CST products. Standard wall units can be used as risers with Standard or Antiqued Texture® finish Bullnose units for treads. VERSA-LOK® caps can also be used to create a distinguished tread.
Create a distinctive pool area or patio by adding columns to your landscaping design. Units are well constructed and extremely stable, with no cutting necessary. Standard column heights are 3, 4, or 5 feet. Any column exceeding 5 feet must be reinforced with rebar and placed on a reinforced concrete footing.
With our new Column Kits, you’ll always know what you’re getting when you order columns. Now bundled with our new Corner Units , our columns are attractive and easy to install.
An alternative to building stairs, our Landscape Steps allow you to transition to another level while complementing your CST pavers and walls.
The CST Fire Pit Kit has been redesigned for the new year with a one-piece stainless steel top screen. It will also come with a fire poker and a grill cover! The “ poker” tool is also very important to use as a precautionary measure while lifting the screen after it has covered a fire. The kit will still have the 72 Munich Wall Small Radius Units, (4 courses high, outside dimension approximately 46” in diameter, inside dimension approximately 30” in diameter.) Each row requires 18 pieces to complete a 360 degree circle. Also included are a steel Fire Pit Ring and a removable grill.
Non-corrosive, nylon/fiberglass VERSA-TUFF Pins provide consistent alignment in VERSA-LOK Standard and Cobble retaining walls.
VERSA-TUFF Snap-off pins are used in VERSA-LOK Accent and Mosaic retaining walls.
The VERSA-Lifter makes it easier to lift and place units, especially on the base course. The two prongs on the lifter are placed into the holes in the VERSA-LOK unit. The action of lifting the handle secures the lifter to the unit and makes for easy, balanced lifting and placement.
Techniseal® Dirt & Grease Cleaner for Pavers effectively removes motor-oil and grease stains (barbecue) from
concrete pavers. Recommended for sealed surfaces and fresh stains, it dissolves, dislodges and encapsulates
grease, thoroughly cleaning without leaving any oily film after rinsing.
PS Paver Seal™ is a natural-look penetrating sealer, used to protect and seal any clean and dry cementitious surface, above ground, vertical or horizontal. It protects the surface against damaging effects of water intrusion, acid rain, deicing chemicals, freeze/thaw exposure, airborne dirt and smog.
PS Paver Seal is easy to apply, it retains the original appearance and ensures a non-yellowing UV resistant finish.
No more weeds and ants on your pavers! Techniseal RG+ Polymeric Sand offers a complete and final solution for the joints between your pavers. Our highly effective jointing sand mix allows the joints of your pavers to retain their original appearance for as long as possible, by repelling ants and other insects and by preventing weed growth.
If you are a contractor, make sure you offer you customers this original and top-performing product - Techniseal RG+ Polymeric Sand uses a brand new technology - it is the ideal product to rid your driveways, patios, walkways and any other outdoor surfaces of weeds and insects.
For false or wide joints, high-humidy or high-traffic areas, we recommend the use of the HP2 Polymeric Sand.